Print online and get it shipped anywhere in Canada. Upload your artwork at checkout.

Artwork Guidelines

Artwork Guidelines

A well-prepared file is the best way to get a great print. Please check these points before you upload.

File type

PDF is best. We also accept JPG, PNG, AI, EPS and ZIP. If your product has a front and back, upload them as two files, or one PDF with two pages.

Size and bleed

Set your document to the finished size of the product, plus 1/16 inch (0.0625″) of bleed on every side. Bleed is the extra area that gets trimmed off. Any colour or image that touches the edge should extend into the bleed, so there’s no thin white line after cutting.

For example, a 3.5″ x 2″ business card should be set up at 3.625″ x 2.125″.

Safe area

Keep text, logos and anything important at least 1/8 inch (0.125″) inside the trim line. Cutting can shift slightly, and anything too close to the edge may get cut off.

Resolution

Images should be 300 DPI at the size they’ll print. Images pulled from websites or social media are usually too low and will look blurry. For large signs and banners, 150 DPI at full size is enough.

Colour

Design in CMYK. RGB files are converted to CMYK when printed, and bright colours like neon greens and electric blues can shift. Screens also show colour differently from ink on paper, so expect some variation.

For a deep, rich black on large areas, use C60 M40 Y40 K100. Keep small text in plain black (K100) so it stays sharp.

Fonts and lines

Convert all fonts to outlines (or embed them in your PDF). Keep lines at least 0.25 pt thick, or they may not print clearly.

Before you upload

  • Check spelling, phone numbers, emails and web addresses
  • Remove crop marks and printer marks
  • Make sure the file matches the size and number of sides you ordered

We print the file you send, so these checks are worth a minute. Questions about your file? Email orders@reliableprintxpress.com.